无锡附近想过夜电话联系

Your current location: home page > News Center > Industry trends
  • eleven
    2020-01
    In the combined hot runner system, the nozzle and splitter plate form a simple unit. The melt flows directly into the nozzle from the splitter plate, so there is no deviation and no dead angle. The threaded nozzle is embedded into the splitter plate to eliminate the leakage between the nozzle and the splitter plate.
  • thirty-one
    2019-12
    As we all know, hot runner is more and more widely used in injection molding industry in recent years, how to select high-quality hot runner system suppliers has become particularly important. There are many suppliers engaged in hot runner system development in the market
  • twenty-eight
    2019-12
    Injection molding is a field with very high technology content. In addition to years of experience accumulation, it also needs a heart to be good at discovering and be very proficient in the whole process of injection molding. Correct learning of all aspects of injection molding requires a lot of repeated experiments, trial and error and summary. But considering that we have many years of innovative experience in the field of injection molding, we can help
  • twenty-eight
    2019-12
    Compared with the traditional injection molding process, high gloss injection molding can greatly improve the glossiness of the product surface, solve the problem of weld line on the product surface, and improve the surface hardness of the product to a certain extent. Therefore, more and more products use high gloss injection molding to replace the subsequent surface treatment process. How does RHCM eliminate the weld mark on the surface of the product? The weld line is formed by two or more strands of melted plastic